Installation Process (Working)
<To be Edited>- Download the Latest iAtkos Download http://osx86.net/f36/iatkos-v7-t3199/
- Burn DVD.
- Insert and boot from the DVD.
- Create the partition and Erase it.
- Continue with installation
- Select the partition to install.
- Agree the terms and Condition.
- Select Customize.
- Select the Default setting
- Select Apple PS2 Driver in the Drivers.(This is for the Mouse and Keyboard)
- Read NOTE Below
- Then click DONE.
- Skip the Disk TEST if required.
- Installation completed and Restart. (Remove the DVD before it starts booting)
- And thats it - boot into the Mac OS X. and Enjoy :)
NOTE:
- For Nvidia Driver after the installation is completed and all the settings and post installation setup is completed.
- Enter the DVD again and install only " Nvidia -> NVdarwin and NVInjectGo" unselect everything else.
- This will bring up the NVidia Driver accelerator working at 1024x768
Ethernet Enable How TO (Working)
- Edit the file in Directory ... /system/Librarys/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon.kext/Contents/Info.plist
- My Device Information : vendor 11AB and Device 4351
- Edit the lines which look like this. 62 will be 51 in the line below
- <key>IOPCIPrimaryMatch</key>
<string>0x436211AB</string> - Load the driver module ... ] # loadkext -t Yukon2.kext
- Configured.
Marvell Yukon 88E8036 PCI-E Fast Ethernet FIXED - InsanelyMac Forum
Marvell Yukon 88E8056 & iATKOS 10.5.1 (9B18) & GA-965P-DS4
Marvell Yukon 88E8056 & iATKOS 10.5.1 (9B18) & GA-965P-DS4
NVidia GeForce 7400 Go (1280x800) How TO (Still under RND)
<To be Edited>Current Scenario : NVidia Driver has been identified by the installation but the resolution is stuck with 1024x768 and the graphics is NOT accelerated very sloppy interface.
NOT workable :(
Solution Hunting : looking into links to get a solution to get the NVidia Driver working (increase resolution from 1024x768 to 1280x800)
Links :
- iATKOS v7 Creating a NVIDIA EFI String for Nvidia 8400M G
- Guide for all nVidia boards, Manual installation
- How to set the outputs on nVidia boards, The NVCAP string (enable VGA, DVI, HDMI, TV ...)
- Howto create nVidia EFI string for Geforce the simple way
- [Mac OSx86] Universal OSx86 Installer
- More Promising info here on this http://diabolik1605.com/DHF/
- http://wiki.osx86project.org/wiki/index.php/HCL_10.5.6
- NVinject http://nvinject.free.fr/forums/viewtopic.php?t=2
Comments
Post a Comment