Nagios monitors your entire IT infrastructure to ensure systems, applications, services, and business processes are functioning properly. In the event of a failure, Nagios can alert technical staff of the problem, allowing them to begin remediation processes before outages affect business processes, end-users, or customers.
Intro from : https://www.nagios.org/about/
Installation Nagios XI
Here is the link to [Nagios XI 5.2.9](https://assets.nagios.com/downloads/nagiosxi/5/xi-5.2.9.tar.gz
Installation for Nagios for most of the cases is quite staight forward.
tar xzf xi*.tar.gz
cd nagiosxi
./fullinstall
And the script will do all the hardward and we are done.
Once install is complete, visit the URL displayed to complete the install
Once install is complete, visit the URL displayed to complete the install
Running Full Install
Installation Complete
Initial Configuration
Configuration
Checking if NRDS is working fine.
Go to the URL
http://nagios-server/nrdp
on the nagios server. [NRDP - Nagios Remote Data processor.]
This is the response from the server.
These submitted parameters will show up in the
Unconfigured Objects
page, which can be added directly.Creating an inbound configuration.
For servers to send-in their monitoring data, we need to create tokens so that the servers can authenticate themself.
Creating inbound config.
NRDP Configuration
NSCA Configuration (Optional - Only if you are using this - Not recommended to use this as this is very old and not very reliable)
Creating NRDP Configuration for Windows and Linux.
Creating Config for Linux
Selecting Token and add config name
Configuration Complete
Now we are ready to setup the Clients.
Once the client starts sending results, if the host/service has not been configured yet it will be found in
Unconfigured Objects
and can easily be added to the monitoring config.Monitoring using NRDS on Linux.
The following commands can be run as root on all clients that will use the new_linux_config config.
The install process will perform the following operations:
The install process will perform the following operations:
- Install NRDS client
- Add a nagios user and group
- Add cron job to process checks
- Download plugins from the NRDP server
There are 2 items you need to modify below, HOSTNAME and INTERVAL.
- HOSTNAME - The name the client will send to the Nagios server as the host.
- INTERVAL - The frequency in minutes that you want the checks to be run. (1-59)
Below are the commands.
cd /tmp
Get the tar file from the server.
wget -O new_linux_config.tar.gz "http:///nrdp/?cmd=nrdsgetclient&token=hardtoguess&configname=new_linux_config"
Unzip and install.
gunzip -c new_linux_config.tar.gz | tar xf -
cd clients
./installnrds [HOSTNAME] [INTERVAL_IN_MINUTES]
Command
./installnrds linux-server 5
This install the client and setup a
When the client
crontab
to send the parameters to the server.When the client
linux-server
sends the data you will see the details on the Unconfigured Objects
page.
Select the parameters and add it to the
It would look similar to the page below.
nagios
monitoring.It would look similar to the page below.
Monitoring using NRDS on windows.
Download the executable from the link in the image
Agreement
Configure Server Name and Interval to send the data
Create ini file and and setup scheduler task
Install
Once the client starts sending results, if the host/service has not been configured yet it will be found in
Unconfigured Objects
and can easily be added to the monitoring config. Example below.
Select the parameters and add it to the
It would look similar to the page below.
nagios
monitoring.It would look similar to the page below.
Creating Groups for user to monitor specific servers.
Below are the steps to create a user groups.
- Create a
contact
file in/usr/local/nagios/etc/static
- Create a
contactgroup
file in/usr/local/nagios/etc/static
- Create a host file which binds the contact group.
- And restart
nagios
service.
What are we trying to do.
- On the
nagios
server we have 2 server which we monitor, A linux server and a windows server. - We want to make sure that the windows server is monitored by the windows admin team.
- We will create a group and a user which can only see window server on the monitoring console.
- This will help create set of groups, who can monitor only their servers which they are responsible for.
Location of all the files on the server.
┌─[zahmed][localhost][~]
└─▪ cd /usr/local/nagios/etc/
┌─[zahmed][localhost][/usr/local/nagios/etc]
└─▪ ls
cgi.cfg hosttemplates.cfg servicedependencies.cfg
commands.cfg import serviceescalations.cfg
contactgroups.cfg nagios.cfg serviceextinfo.cfg
contacts.cfg ndo2db.cfg servicegroups.cfg
contacttemplates.cfg ndomod.cfg services
hostdependencies.cfg nrpe.cfg servicetemplates.cfg
hostescalations.cfg nsca.cfg static
hostextinfo.cfg pnp timeperiods.cfg
hostgroups.cfg resource.cfg
hosts send_nsca.cfg
┌─[zahmed][localhost][/usr/local/nagios/etc]
└─▪
Creating a contact with
windowsnagiosadmin
user.┌─[zahmed][localhost][/usr/local/nagios/etc/static]
└─▪ cat windows-server-contact.cfg
define contact {
contact_name windowsnagiosadmin
alias Windows Nagios Administrator
host_notification_period nagiosadmin_notification_times
service_notification_period nagiosadmin_notification_times
host_notification_options d,u,r,f,s
service_notification_options w,u,c,r,f,s
host_notification_commands xi_host_notification_handler
service_notification_commands xi_service_notification_handler
email ahmed@gmail.com
#use xi_contact_generic
}
Create a
contactgroup
and add the above windowsnagiosadmin
user as a member.┌─[zahmed][localhost][/usr/local/nagios/etc/static]
└─▪ cat windows-server-contactgroup.cfg
define contactgroup {
contactgroup_name windowsadmins
alias Windows Nagios Admin Group
members windowsnagiosadmin
}
Now finally create a host configuration which is tied to the
windowsadmins
contact group above. ┌─[zahmed][localhost][/usr/local/nagios/etc/static]
└─▪ cat nagios-test-windows.cfg
define host {
host_name nagios-test-wındows
use xiwizard_passive_host
address nagios-test-wındows
max_check_attempts 5
check_interval 5
retry_interval 1
check_period xi_timeperiod_24x7
contact_groups windowsadmins
notification_interval 60
notification_period xi_timeperiod_24x7
stalking_options n
icon_image passiveobject.png
statusmap_image passiveobject.png
_xiwizard passiveobject
register 1
}
┌─[zahmed][localhost][/usr/local/nagios/etc/static]
└─▪
Files in
static
directory.┌─[zahmed][localhost][/usr/local/nagios/etc/static]
└─▪ ls -l
total 24
-rwxrwxr-x 1 apache nagios 661 Aug 12 11:27 windows-server-contact.cfg
-rwxrwxr-x 1 apache nagios 211 Aug 12 11:57 windows-server-contactgroup.cfg
-rwxrwxr-x 1 apache nagios 802 Aug 12 11:39 nagios-test-windows.cfg
-rwxrwxr-x 1 apache nagios 878 Jun 14 20:43 xiobjects.cfg
-rwxrwxr-x 1 apache nagios 4002 Jun 14 20:43 xitemplates.cfg
-rwxrwxr-x 1 apache nagios 0 Jun 14 20:43 xitest.cfg
-rwxr-xr-x 1 root nagios 649 Aug 12 11:59 zahmedcontact.cfg
Check Nagios config.
┌─[zahmed][localhost][/usr/local/nagios/etc/static]
└─▪ sudo service nagios checkconfig
[sudo] password for zahmed:
Running configuration check...
OK.
All OK, then restart
nagios
┌─[zahmed][localhost][/usr/local/nagios/etc/static]
└─▪ sudo service nagios restart
Running configuration check...
Stopping nagios:. done.
Starting nagios: done.
Finally create a user on nagios which matches our configuration
windowsnagiosadmin
.
Creating a
windowsnagiosadmin
user.
Host when we login as
nagiosadmin
Hosts when we login as
windowsnagiosadmin
Installation and Configuring NSClient++
for Windows.
Download and install
NSClient++
on the windows server. https://nsclient.org/download/
First Installing
NSClient++
Configure NSClient
Update the
allowed_hosts
and password
. And make sure to use check_nt
Install Complete
Check service is running
Configuring on the nagios
server.
We need to create couple of configurations for the first time a windows machine is setup. After that all we have to do is add the
hosts
configuration. Everything else will be the same. (Unless we change the password on few of the windows machine then we have to update / create new command configuration)- Create a
host
configuration. - Add
services
configuration which will define what we want to monitor. - Create a
command
configuration.
First lets create a file
new-windows-test.cfg
in /usr/local/nagios/etc/static
directory.
We will be adding the
host
and service
configuration into the same file.
NOTE :
check_command
in the service
definitions should be same as the command_name
in commands
configuration. Example: check_nt_test
┌─[zahmed][localhost][/usr/local/nagios/etc/static]
└─▪ cat new-windows-test.cfg
define host{
use windows-server ; Inherit default values from a Windows server template (make sure you keep this line!)
host_name winservertest
alias My Windows Server
address 172.2.2.35
max_check_attempts 10
check_interval 5
retry_interval 1
check_period 24x7
contacts nagiosadmin
notification_interval 30
notification_period 24x7
notification_options d,r
register 1
}
define service{
use generic-service
host_name winserver
service_description NSClient++ Version
check_command check_nt_test!CLIENTVERSION
}
define service{
use generic-service
host_name winserver
service_description Uptime
check_command check_nt_test!UPTIME
}
define service{
use generic-service
host_name winserver
service_description CPU Load
check_command check_nt_test!CPULOAD!-l 5,80,90
}
define service{
use generic-service
host_name winserver
service_description Memory Usage
check_command check_nt_test!MEMUSE!-w 80 -c 90
}
define service{
use generic-service
host_name winserver
service_description C:\ Drive Space
check_command check_nt_test!USEDDISKSPACE!-l c -w 80 -c 90
}
define service{
use generic-service
host_name winserver
service_description W3SVC
check_command check_nt_test!SERVICESTATE!-d SHOWALL -l W3SVC
}
define service{
use generic-service
host_name winserver
service_description Explorer
check_command check_nt_test!PROCSTATE!-d SHOWALL -l Explorer.exe
}
First lets create a file
new-windows-test-command.cfg
, update the password -s
below with the password we created on the windows machine. [Check image above] ┌─[zahmed][localhost][/usr/local/nagios/etc/static]
└─▪ cat new-windows-test-command.cfg
define command{
command_name check_nt_test
command_line $USER1$/check_nt -H $HOSTADDRESS$ -p 12489 -s nagios123 -v $ARG1$ $ARG2$
}
After we have configured new files.
┌─[zahmed][localhost][/usr/local/nagios/etc/static]
└─▪ ls -l new*
-rw-r--r-- 1 apache nagios 1301 Aug 15 11:07 new-windows-test.cfg
-rw-r--r-- 1 apache nagios 134 Aug 15 10:57 new-windows-test-command.cfg
Check if our configuration is fine.
┌─[zahmed][localhost][/usr/local/nagios/etc/static]
└─▪ sudo service nagios checkconfig
[sudo] password for zahmed:
Running configuration check...
OK.
Great!!, we have not errors, now we can restart
nagios
. ┌─[zahmed][localhost][/usr/local/nagios/etc]
└─▪ sudo service nagios restart
Running configuration check...
Stopping nagios:. done.
Starting nagios: done.
Restart complete and we are done.
Checking the new host on the dashboard.
New host
winservertest
is added to the dashboard.
We are receiving monitoring data as well.
Performance data.
Install shield online training
ReplyDeleteKubernetes online training
Linux Admin online training
Linux online training